Utility Sets

[Series 1100]
SIZES: 12" - 36" Wheel Diameter
CLASS: I, II
PERFORMANCE: 1,500 to 30,000 cfm and up to 8" SP.
APPLICATION: Commercial HVAC and light industrial
ARRANGEMENT: 10
DESIGN: Standard motor and belt weather cover with sloped surface for better protection from the elements. These packaged fan sets are an economical choice for a variety of air handling applications. Foward Curve models are also available.

DOWNLOADS

Maintenance and Installation Manual: Centrifugal Fans

1100 Series Single Page
1100 Series Technical Catalogue

3000 Series Single Page
3000 Series Technical Catalogue

6100 Series Single Page
6100 Series Technical Catalogue
6200 Series Single Page
6200 Series Technical Catalogue

8000 Series Single Page
8000 Series Technical Catalogue


AVAILABLE FEATURES INCLUDE


OSHA Belt Gaurds (Arrangement 9 and 1)
Extended Lube Lines
AMCA ("A","B" & "C") Spark Resistant
Access Door
Drain & Plug
Stainless Construction
Heat Slinger
Unitary Base with or without isolators
Lifting Lugs
Punched Flanged or Slip Fit Inlet and Outlet
Disconnect Switch
Explosion Proof Motors
Dampers (Manual and Actuated)
Inlet Screen
Aluminum High Heat Paint
Epoxy paint
Variable Inlet Vanes

Versitility Sets

[Series 6100 Unifoil & 6200 Ultrafoil]
WHEELS: Backward Curve (UNIFOIL) and Airfoil (ULTRAFOIL)
SIZES: 12" - 49" Wheel Diameter
CLASS: I, II, & III
PERFORMANCE: 1,500 to 70,000 cfm and up to 13" SP.
APPLICATION: Commercial HVAC and light industrial. Commonly used in processes such as dust collection.
ARRANGEMENT: 1, 4 & 9
DESIGN: Robust square design with a small footprint provides a wide range of mounting possibilities.

Industrial Unifoil (Backward Curve)

[Series 3000]
SIZES: 12" - 89" Wheel Diameter
CLASS: I, II, III and IV
PERFORMANCE: 1,500 to 200,000 cfm and up to 12" SP.
APPLICATION: Light to heavy industrial. Processes or HVAC systems. Optional high heat design for applications.
ARRANGEMENT: 1, 3, 8 and 9.
DESIGN: Robust design with a reinforcing exterior ribs for added stiffness. SWSI and DWDI designs are both available.

Industrial Ultrafoil (Airfoil)

[Series 8000]
SIZES: 12" - 89" Wheel Diameter
CLASS: I, II, III and IV
PERFORMANCE: 1,500 to 200,000 cfm and up to 12" SP.
APPLICATION: Light to heavy industrial. Processes or HVAC systems. Optional high heat design.
ARRANGEMENT: 1, 3, 8 and 9.
DESIGN: Airfoil blades provide an efficient use motor power. Robust design with a reinforcing exterior ribs for added stiffness. SWSI and DWDI designs are both available.